The ClimateLineAir™ is ResMed's heated air tubing that delivers the desired temperature at your CPAP mask. ClimateLineAir Oxy is a variant of the ClimateLineAir that has a built-in oxygen connector to attach a supplemental oxygen supply.
When used with the HumidAir™ CPAP humidifier, ClimateLineAir CPAP heated tubing allows you to use Climate Control. Climate Control is designed to make therapy more comfortable by enabling constant temperature and maintaining humidity.
The ClimateLineAir™ heated air hose is designed for use with AirSense™ 10 / AirCurve™ 10 and Lumis ™ devices. Please read this entire user guide together with your device user guide before using your ClimateLineAir heated air CPAP tubing.
Climate Control
Climate Control is an intelligent system that controls the humidifier and the ClimateLineAir heated air CPAP tubing to deliver constant, comfortable temperature and humidity levels during therapy. Designed to prevent dryness of the nose and mouth, it maintains the set temperature and relative humidity while you sleep. Climate Control can be set to either Auto or Manual and is only available when both the ClimateLineAir and the HumidAir humidifier are attached.
Cleaning
You should clean the air tubing weekly as described.
Wash the air tubing in warm water using mild detergent. Do not wash in a dishwasher or washing machine.
Rinse the air tubing thoroughly and allow to dry, out of direct sunlight and/or heat.
Checking
You should regularly check the air tubing for any damage. If there are any holes, tears or cracks you should replace it.
Reconnecting the air tubing
When the air tubing is dry, you can reconnect it to the device.
Connect the air tubing firmly to the air outlet located on the rear of the device.
Connect the free end of the air tubing firmly onto the assembled mask.
Features
Lightweight
Optimal comfort
No Complications
Use with AirSense™ 10 and AirCurve™ 10 Units
This tubing does not work with AirSense 11
The ClimateLineAir™ heated air tubing distributes comfortable heated air flow at the desired temperature directly to your CPAP mask. Use the ClimateLineAir™ CPAP tubing with the HumidAir™ Humidifier and use ResMed Climate Control to enhance your PAP therapy. Enjoy a consistent and preserved humidified temperature for more pleasurable therapy sessions.
The ClimateLineAir™ heated air tubing works with both the AirSense™ 10 and AirCurve™ 10 PAP devices. No complicated settings to change or update when changing or updating tubing.
Remember replace your ClimateLineAir™ heated air CPAP tubing every 6 months to ensure maximum compliance and overall health of your PAP therapy.