ResMed AirCurve™ 10 VAuto BiPAP Machine w/HumidAir™ BiLevel

The AirCurve™ 10 VAuto with HumidAir™ BiLevel automatically determines the pressure needed based on the patient’s breathing patterns. The advanced AirCurve™ 10 VAuto is an auto-adjusting bilevel/bipap with both AutoSet™ algorithm exclusively by ResMed and Easy-Breathe waveform for patients requiring increased pressure support. The VAuto holds the airway open while preserving the fixed pressure by adjusting the baseline pressure.

ResMed's ClimateLineAir™ CPAP tube provides added comfort and less condensation buildup in the tubing during therapy. Along with the enhanced Climate Control Auto feature which monitors and regulates the humidification system within the HumidAir™ BiPAP humidifier, the ClimateLineAir™ CPAP tube controls the air temperature to reduce the water buildup. These two features work together to provide optimal comfort without condensation and atmosphere temperature change disruptions. Select the ClimateLineAir™ CPAP Tube during the selection process to receive this advanced technology.

Quiet operation as always with the ResMed devices, the ResMed AirCurve™ 10 VAuto with HumidAir™ BiLevel/BiPAP Humidification System is at 26 dBA. One of the quietest devices on the market today, the users get the sleep apnea therapy needed without the added noise produced by other brands. Clinicians and patients agree that device noise interrupts therapy and causes more difficulties during therapy but with a quiet unit like the AirCurve™ 10 VAuto the patient can rest peacefully while receiving therapy.

Easy patient data monitoring systems through ResMed's built-in wireless technology, AirView/easyCare online, AirView's remote assist, and the myAir™ systems. Patient's and clinicians can monitor therapy progression and keep up with any updates as needed via the ResMed's myAir™ program.

The ResMed EPR is still a standard feature on the ResMed AirCurve™ CPAP devices which allows for smooth therapy transitions that will not alarm the patient while asleep. Abrupt pressure changes can alarm the users causing interruptions in therapy as well as difficulties in sleep patterns which cause non-compliance. With the ResMed EPR Easy-Breathe technology, users will experience a quiet and uninterrupted therapy session with the smooth and delicate transitions in pressure change. BiLevel/BiPAP therapy will remain intact without disruptions.

AirCurve Advanced Technology

TiControl

The Ticontrol feature sets a minimum and maximum time limit for the patient’s perfect natural air flow. TiControl provides timely intervention when necessary during therapy when the patient is having difficulty but allows a normal cycle of breaths to determine need. Simply set the minimum and maximum time limits and let the TiControl do the rest.

Trigger Sensitivity

Use the Trigger Sensitivity feature to synchronize the respiratory efforts between the patient and the AirCurve 10 BiPAP device. The sensitivity settings allow the unit to optimize the reading of the patient’s breaths and use the information to perform up to the patient needs and beyond.

Vsync

Synchronized therapy between you and your unit is possible with the Vsync technology. This advanced leak management feature is a standard feature with all AirCurve 10 BiPAP devices.

* PLEASE NOTE: ALWAYS drain your water chamber completely when transporting or moving your machine.